Решетки

Hide Productfinder

Product Finder

DGW

Damper units with opposed action blades and blades for air direction control

Nominal sizes 225 × 75 – 1225 × 525 mm
Perimeter angle section frame

AWT

Ventilation grille with special profiled blades (rectangular cross section)

Nominal sizes 325 × 125 – 1225 × 325 mm
Volume flow rate range 17 – 950 l/s or 61 – 3420 m³/h
Grille face made of aluminium with anodised finish
Tested for installation in gymnasiums
Front border with countersunk holes, 30 mm wide

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Installation subframe

TRS-K

Ventilation grille with droplet shaped blades

Nominal sizes 225 × 75 to 1225 × 325 mm
Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
Grille face made of galvanised sheet steel
Front border with countersunk holes, 27 mm wide

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Installation subframe
Attachments for volume flow rate balancing and air direction control

CFG

TROX heavy construction computer room floor grille type CFG is used for supply air to tackle computer room hotspots with localised cooling.

CFG Fan assisted computer room floor grilles eliminate hotspots by providing up

to 5kW) of cooling per cabinet. It has been specially developed for installing in raised access floors.

Providing cool air exactly where required, high temperatures can be eliminated, reducing the risk of equipment failure due to overheating.

The unit boasts simple plug and play connectivity to ensure a speedy and failsafe operation.

TRS-R

Ventilation grille with droplet shaped blades

Nominal sizes 225 × 75 – 1225 × 225 mm
Volume flow rate range 11 – 930 l/s or 40 – 3348 m³/h
Grille face made of galvanised sheet steel
Front border with countersunk holes, 27 mm wide

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Attachments for volume flow rate balancing and air direction control

AF / AH

Single ventilation grilles and horizontal run sections with special profiled blades

Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
Grille face made of aluminium with anodised finish
Front border suitable for floor installation without an installation subframe
Removable grille core with special spring clip fixing

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Attachments for volume flow rate balancing and air direction control

AFG

The type AFG floor grille has been specifically developed for mounting in Raised Access Floors in such areas as Computer Rooms, where load and damage resistance are of the utmost importance.

Having a heavy duty construction, the AFG can replace 600mm square floor tiles to handle supply air or alternatively extract air.

Grille border depth can be specified to suit the type of floor system used.

A range of surface finishes is available.

Can be fitted with rear opposed blade damper assembly for air volume flow control.

Ventilation grille with droplet shaped blades

Nominal sizes 225 × 125 – 1225 × 525 mm
Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
Grille face made of sheet steel, powder-coated
Front border with countersunk holes, 27 mm wide

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Grille face made of galvanised sheet steel, without powder coating
Installation subframe
Installation subframe for fitting filter media
Attachments for volume flow rate balancing and air direction control
Concealed screw fixing

X-GRILLE Basic

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

Nominal sizes 225 × 125 – 1225 × 525 mm
Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
Energy-efficient and acoustically optimised air discharge
Symmetric blade profile for two-way entry flow
Uniform look and easy adjustment due to concealed blade linkage
Gently sloped border construction, almost completely flush with the installation surface
Linear look, ideal for continuous horizontal runs
Use of existing rear assemblies
Easy replacement of existing grilles due to standard installation dimensions

Optional equipment and accessories

Installation subframe
Attachments for volume flow rate balancing and air direction control
Concealed screw fixing
Spring clip fixing

AGW

Damper units with opposed action blades

Nominal sizes 225 × 75 – 1225 × 525 mm
Perimeter angle section frame

X-GRILLE Cover

The new X-GRILLE Cover ventilation grilles, made of high-quality aluminium combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

Nominal sizes 225 × 125 – 1225 × 525 mm
Volume flow rate range 16 – 2554 l/s or 58 – 9194 m³/h
Energy-efficient and acoustically optimised air discharge
Symmetric blade profile for two-way entry flow
Uniform look and easy adjustment due to concealed blade linkage
Concealed, optimised screw fixing
Linear look, ideal for continuous horizontal runs
Easily exchangeable cover plates allow for a lively two-colour look
Use of existing rear assemblies
Easy replacement of existing grilles due to standard installation dimensions

Optional equipment and accessories

Installation subframe
Attachments for volume flow rate balancing and air direction control
Concealed screw fixing
Spring clip fixing

TRS

Ventilation grille with droplet shaped blades

Nominal sizes 225 × 75 to 1225 × 325 mm
Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
Grille face made of sheet steel, powder-coated
Front border with countersunk holes, 27 mm wide

Optional equipment and accessories

Grille face in RAL CLASSIC colours
Grille face made of galvanised sheet steel, without powder coating
Installation subframe
Installation subframe for fitting filter media
Attachments for volume flow rate balancing and air direction control
Concealed screw fixing

AFP

Rejas para impulsión y retorno de aire, prevista para montaje en suelos técnicos, generalmente en salas de ordenadores, con marco frontal y lamas horizontales fijas.

La salida de aire puede ser tanto perpendicular a la rejilla -en el tipo AF-0-, o bien con una inclinación de 15º -en el tipo AF-15-. Marco y lamas de perfil construidos en aluminio extruido.

Prevista para montaje apoyada sobre la estructura del suelo técnico en sustitución de una de las placas.

Para equilibrar el aire que pasa a través de las rejas, opcionalmente se puede suministrar con una parte posterior para regulación del caudal de aire tipo AG, con las lamas dispuestas en oposición, regulables desde la parte frontal, construida con chapa de acero al carbono.

ASW

Hit and miss damper with airflow straighteners

Nominal sizes 225 × 75 to 1225 × 325 mm
Perimeter angle section frame

Please select your disired product properties:

СЕРВИСЫ ТРОКС

TROX Easy Product Finder Программа подбора оборудования

АКАДЕМИЯ ТРОКС Обучающие семинары от ТРОКС

ПРОДУКЦИЯ A-Z Быстрый и легкий поиск

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.

Решетки

Product Finder

DGW

AWT

TRS-K

CFG

TRS-R

AF / AH

AFG

TR

X-GRILLE Basic

AGW

X-GRILLE Cover

TRS

AFP

ASW

СЕРВИСЫ ТРОКС

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE