Серия RFD

RFD-Q-D

Circular diffuser face

With air outlet nozzle

Without air outlet nozzle

Horizontal swirling air discharge

RFD

With low sound power level for comfort and industrial zones, with fixed air control blades

Circular and square ceiling swirl diffusers

Nominal sizes 125, 160, 200, 250, 315, 400
Volume flow rate range 4 – 330 l/s or 14 – 1188 m³/h
Diffuser face made of galvanised sheet steel, powder-coated, or of aluminium (depending on variant)
For supply and extract air
For constant and variable volume flows
For all types of ceiling systems
With discharge nozzle ideal for cooling in case of freely suspended installation
High induction results in a rapid reduction of the temperature difference and airflow velocity
Air change rates of up to 35 per hour can be achieved by arranging several diffusers in a row with a minimum pitch of 0.9 m (centre line to centre line)
Ideal for comfort zones

Optional equipment and accessories

Exposed diffuser face available in RAL CLASSIC colours
Horizontal or vertical duct connection
Plenum box with cord-operated damper blade and pressure tap
Shallow plenum box

General information

Application

Type RFD ceiling swirl diffusers are used as supply air or extract air diffusers for comfort zones
Attractive design element for building owners and architects with demanding aesthetic requirements
Horizontal swirling supply air discharge for mixed flow ventilation
The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
For variable and constant volume flows
For supply air to room air temperature differences from – 12 to + 10 K
For room heights up to 4 m (lower edge of suspended ceiling)
For all types of ceiling systems
With an extended border and discharge nozzle also suitable for freely suspended installation (supply air variant)

Special characteristics

Low sound power level, ideal for comfort zones
Fixed blades
For all types of ceiling systems
Horizontal or vertical duct connection
Air change rates of up to 35 per hour can be achieved by arranging several diffusers in a row with a minimum pitch of 0.9 m (centre line to centre line)

Nominal sizes

125, 160, 200, 250, 315, 400

Variants

RFD-Q: Square diffuser face
RFD-R: Circular diffuser face
RFD-*-D: Diffuser face with discharge nozzle

Connection

K: Vertical duct connection, with duct collar
US: Vertical duct connection, with transition piece
A: Horizontal duct connection, with plenum box

Only RFD-R

UO: Vertical duct connection, with transition piece and cross bar

Only RFD-R-D

UD: Vertical duct connection, with transition piece, cross bar and discharge nozzle
N: Horizontal duct connection, with shallow plenum box to be installed above open cell ceilings

Parts and characteristics

Circular or square diffuser face
Diffuser face with radially arranged fixed air control blades

Attachments

M: Damper blade for volume flow rate balancing
MN: Pressure tap and cord-operated damper blade for volume flow rate balancing with the diffuser face in place

Accessories

Lip seal

Construction features

Spigot suitable for circular ducts to EN 1506 or EN 13180
Spigot with groove for lip seal (if accessory lip seal has been ordered)

Technical data

Nominal sizes: 125, 160, 200, 250, 315, 400 mm
Minimum volume flow rate, with ΔtZ = –6 K: 4 – 36 l/s or 14 – 130 m³ /h
Maximum volume flow rate, with LWA ≅ 50 dB(A): 22 – 330 l/s or 79 – 1188 m³ /h
Supply air to room air temperature difference: –12 to +10 K

Standards and guidelines

Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

Low maintenance as construction and materials are not subject to wear and tear
Inspection and cleaning according to VDI 6022

Technical information

Schematic illustration of the RFD-R-D, with plenum box for horizontal duct connection

① Diffuser face
② Central fixing screw
③ Plenum box
④ Cross bar
⑤ Suspension hole
⑥ Spigot

Optional
⑦ Lip seal
⑧ Pressure tap
⑨ Damper blade for volume flow rate balancing
⑩ Green cord for closing the damper blade
⑪ White cord for opening the damper blade
⑫ Measuring tube
⑬ Text label indicating plenum box variant

Functional description

Ceiling swirl diffusers allow the supply air from ventilation systems to flow into the room in a swirl pattern. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. Ceiling swirl diffusers allow for large volume flow rates. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.

Type RFD ceiling swirl diffusers have fixed blades. Air discharge is horizontal with an omni-directional flow. The supply air to room air temperature difference may range from –12 to +10 K.

A damper blade (optional) simplifies volume flow rate balancing for commissioning. Pressure tap and cord-operated damper blade (optional) allow for volume flow rate balancing with the diffuser face in place.

To give rooms an aesthetic, uniform look, Type RFD diffusers may also be used for extract air.

Nominal sizes	125, 160, 200, 250, 315, 400 mm
Minimum volume flow rate, with Δt_Z = –6 K	4 – 36 l/s or 14 – 130 m³/h
Maximum volume flow rate, with L_WA ≅ 50 dB(A)	22 – 330 l/s or 79 – 1188 m³/h
Supply air to room air temperature difference	–12 to +10 K

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design program.

Ceiling swirl diffusers with square or circular diffuser face. Supply air and extract air variants for comfort zones and industrial zones. Diffuser face with fixed air control blades for horizontal swirling supply air discharge creating high induction levels. Ready-to-install component which consists of the diffuser face with radially arranged fixed air control blades and either a spigot only or a plenum box with side entry or top entry spigot, and suspension holes or suspension lugs. The diffuser face is fixed to the cross bar with a central screw. Spigots are suitable for ducting according to EN 1506 or EN 13180. Sound power level of the air regenerated noise measured according to EN ISO 5135.

Special characteristics

Low sound power level, ideal for comfort zones
Fixed blades
For all types of ceiling systems
Horizontal or vertical duct connection
Air change rates of up to 35 per hour can be achieved by arranging several diffusers in a row with a minimum pitch of 0.9 m (centre line to centre line)

Technical data

Nominal sizes: 125, 160, 200, 250, 315, 400 mm
Minimum volume flow rate, with ΔtZ = –6 K: 4 – 36 l/s or 14 – 130 m³ /h

Maximum volume flow rate, with LWA ≅ 50 dB(A): 22 – 330 l/s or 79 – 1188 m³ /h
Supply air to room air temperature difference: –12 to +10 K

Sizing data

qᵥ [m³ /h]
Δpt [Pa]
air-regenerated noise
LWA [dB(A)]

Life cycle assessment

A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.

Downloads

product information

certificates

Environmental Product Declaration RFD

RFD_EPD_2024_03_DE_en Environmental Product Declarations 380 KB pdf

СЕРВИСЫ ТРОКС

АКАДЕМИЯ ТРОКС Обучающие семинары от ТРОКС

TROX Easy Product Finder Программа подбора оборудования

ПРОДУКЦИЯ A-Z Быстрый и легкий поиск

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.